No. of Recommendations: 7
I will have 4 ceiling mounted speakers:

Klipsch KHC-6
50 watts continuous, 200 peak
92 db sensitivity
50Hz-20kHz + - 3db freq. response

Very good speakers! As dougaha noted, you'll need at least one more for a 5.1 setup, and one more each for 6.1 or 7.1.

Do reconsider the ceiling mounting of the speakers, as that's going to fire the sound down into your floor rather than towards your listening position. If the floor's carpeted, that's going to play hell with the acoustics (although for the surrounds it might be a good idea). It's more common to wall-mount the speakers instead.

Are these units you have rectangular or circular? In-wall speakers specifically for home theater can be either shape, though I've seen the rectangular form more often. These really are designed for mounting in the wall and have separate mid/bass cones and tweeters, where the circular ones are more often intended for actual ceiling use and consist of a single mid/bass cone, typically with a dedicated tweeter unit center-mounted inside the cone.

I guess this gets into FAQ #2: Speakers and speaker placement. (WARNING: VERY long posting ahead -- I leave to the likes of dougaha to condense this down to a true FAQ)

First some terms:

Tweeter: A metal dome or ribbon used to produce the highest frequency sounds, such as a cymbal crash or whistle. Most speakers have one of these units, though some cheaper models lack one entirely, while others (such as some center channel speakers) have two.

Mid/Bass Cone: A small to medium size (5" to 8" diameter) cone, usually made of carbon fiber or high quality plastic/resin composites. Used to produce the sound of voices, most musical instruments, and many sound effects that fall in the middle of the frequency range. They generally can produce sounds as low as 80 or 100 Hz, and as high as 2 KHz. All speakers have at least one of these units. Some high-end models will have two.

Bass Cone: A dedicated low-frequency unit, usually larger than the mid/bass cone. When a speaker has both mid/bass and bass cones, the mid/bass handles sound down to several hundred Hz, while the bass cone is dedicated to the lowest frequency sounds. These are generally used only in higher-end speaker units, and some ultra high-end models will have two of these along with two mid/bass units.

Mains: Term used for the front left and right speakers, sometimes includes the front center speaker as well. As the name implies, these speakers produce most of the sound in a surround system.

Surrounds: The speakers placed in the rear of the room. Mostly produce background and atmospheric sounds.

Channel: A single sound source in a surround system. Channels include Front Left, Front Right, Front Center, Rear Left, Rear Right, Rear Center, Back Rear Right and Back Rear Left.

Hertz (Hz): A unit of sonic frequency. The human ear is theoretically capable of hearing a range from 20 Hz at the lowest end to 20,000 Hz (20 Kilohertz, or 20 KHz) at the high end. If you're one of the lucky people who can hear the whine of a TV or computer monitor, or get a headache any time you walk into a store with a silent alarm system, you can hear 20 KHz or slightly higher. If you can feel the pressure wave of a popping balloon a split second before you hear the bang, you can hear down around 20 Hz or slightly lower. Low A on a piano is 120 Hz.

Decibel (dB): A unit of sound volume. Decibels are measured on a logarithmic scale, so an increase of 3 dB is actually twice as loud as the original volume.

Sensitivity: A measure of how much sound a speaker will produce when one Watt of power is applied to it. Measured in Decibels. The higher the number, the more sensitive the speaker is and the more sound it will produce at the same number of applied Watts. A speaker with a sensitivity of 92 dB is twice as loud at the same volume setting as a speaker with an 89 dB sensitivity. Net effect: More-sensitive speakers will sound loud at lower volumes, saving wear and tear on the amplifiers in your receiver.

Monopole speakers: Speakers with only one set of mid/bass and tweeter units. All standard speakers are monopole.

Dipole speakers: Speakers with two sets of mid/bass and tweeter units. Each set is mounted opposite to the other in the speaker cabinet. In essence, it's a pair of speakers mounted back-to-back in a single cabinet. These are generally mounted on a wall, so that sound is produced in opposite directions at the same time. These are special (and generally expensive) speakers used for the surround channels.

2-way speaker: A speaker with a single tweeter

Subwoofer: A large (usually 10" or 12" diameter) speaker with a dedicated amplifier built in to the cabinet. Used to produce Low Frequency Effects, which are generally 80 Hz or lower. Normal speakers (even high-quality ones) usually can't go lower than 80 or 100 Hz without distortion, unless they were built with an integrated subwoofer unit.

Now for the details:

Home Theater uses discrete "channels" for sound. All varieties of surround sound have three speakers placed in the front of the room -- left, center, and right. The center channel is where every bit of main dialog is routed, and (surprisingly) many of the sound effects as well. For this reason, the center channel is speaker is often considered the most critical of the entire set, and should have good-quality tweeters and mid/bass cones.

The left and right front speakers do the work of producing peripheral sound effects, as well as any dialog that is panned off to the side of the picture (or completely out of the picture) and much of the musical soundtrack. These speakers are also important, and are often the largest speakers in a home theater setup. These should at minimum have a single tweeter and mid/bass cone.

The remaining speakers in a surround sound system are the surrounds. In a 5.1 system there are only two surrounds -- rear left and rear right. A 6.1 system adds a rear center channel, while a 7.1 system adds a second pair of rear left and right. The surround speakers are often small, though some people prefer to use a pair of speakers identical to the front left/right units.

Regardless of what type of system you have, all of the surrounds do the same thing: They produce the ambient background sounds in a movie soundtrack, as well as any sounds meant to pan from rear to front. For a few examples:

- In the movie "Pearl Harbor", the big plane attack scene has bullet impacts panning from front to back and left to right, moving in sync with the movement of the planes and the bullet sprays.

- Likewise, in "The Matrix", the big gun fight in the lobby is full of the sounds of empty bullet casings falling to the floor; the metallic clinks primarily come from the rear surrounds and echo through the room just like they would in the lobby.

- In "The Abyss", the rear surrounds constantly have small creaks and water droplets falling as characters are talking in the underwater lab, making you feel like you're really underwater.

- Finally, in the movie "The Others", there's a scene where a girl in a room with her brother closes the curtains, putting the room in total darkness. A few moments later, soft footsteps sound from the right rear surround, quickly growing in pace and volume as they run to the front center, where the curtain is suddenly yanked open -- showing no one there besides the girl and her brother, right where they were before she closed the curtain. Our room was dark when I saw this, making it easily one of the creepiest moments I've experienced in home theater. I really felt like there was someone in the house with us!

The main thing with increasing the number of surround speakers is speaker type and placement. In a 5.1 system, most people recommend using dipole surrounds. When mounted on the wall so they're in line with your sitting position (generally in the middle of the room), the speakers fire to the front and rear of the room, allowing the sound to bounce around a bit before reaching your ears. This is desirable -- you're sitting in what's called "the null", where no sound is directly audible from the speaker and you only hear the sound after it's reflected off of a wall or two. Since the sounds from these speakers are atmospheric, you ideally don't want to be able to pinpoint the sound to any one specific location. It's supposed to be diffuse and hard to pinpoint, just like real ambient sounds in the real world.

Ceiling mounted speakers can also work as surrounds. They give the sound the same opportunity to bounce around a bit before reaching your ears, giving it that desired diffuse quality. The only potential drawback is if the floor is carpeted, since the carpet will absorb much of the sound and not allow it to reflect decently.

In a 6.1 and 7.1 system, however, standard speakers will often do the trick, since they are placed behind the listener facing towards the opposite wall (or, for the center rear in a 6.1 system, the speaker is sometimes placed pointing up towards the ceiling with the speaker mounted on a floor stand). The greater number of speakers allows for sounds to be more spread out, getting the same diffuse effect as a single pair of dipole surrounds. In fact, using a single pair of dipole surrounds in a 5.1 system is really no different than using four standard speakers in a 7.1 setup. I'd argue that using four dipole units in a 7.1 system is overkill, but others here may feel otherwise.

Finally, there's the subwoofer. That's the .1 in a 5.1, 6.1 or 7.1 system. It handles the Low-Frequency Effects (LFE) for a movie soundtrack. Examples of LFE include:

- The rumble when the T-Rex makes his appearance in Jurassic Park.
- The deep thrum of the engines as the massive spaceship ponderously moves past in the opening of Space Balls: The Movie.
- Any other deep sound that goes below about 60 or 80 Hz

Subwoofers are designed to handle these ultra-low sounds. They have large cones (generally 10" or 12" diameter), big cabinets to move all that air around, and dedicated amplifiers to handle the massive power requirements of actually moving that cone through that big volume of air. Some regular speakers (3-way units with dedicated woofers, or even 2-way units with a well-made 8" diameter mid/bass cone) can handle the job of producing most LFE sounds (down to about 40 or 60 Hz). But to get the deepest sounds (down to 20 Hz) you really need a subwoofer.

When a subwoofer is connected to the system, it automatically routes any sounds that fall below a specified cutoff frequency (generally 80 Hz) to the subwoofer, while all other sounds go the other speakers in the system. This actually helps keep your main speakers in good condition for a longer time, because they're not being driven to produce all of the deep effects any more, saving wear and tear on your cones and the other innards. That also means that they'll do a better job producing the mid-range and high sounds, making the sound cleaner overall.

And because LFE sounds can't be pinpointed, you can pretty much put a subwoofer anywhere in the room. It does require a little tinkering to fit it in the room's acoustics just right, but if there's one place that's going to work better than any other for keeping the thing out of sight, then just put it there, calibrate it, and forget it.

I guess calibration is the last thing to mention. All modern A/V receivers allow you to tweak the volume of individual speakers so you get a uniform sound field. The speakers are calibrated through a menu on the receiver, which will play "pink noise" through each speaker so you can adjust it to the same volume as all the others. Some receivers, like the Yamaha RX-V657, include a microphone you place in your listening position while the test tones are playing; the receiver evaluates the sound picked up by the microphone and adjusts the speakers automatically to have the same overall level.

If you don't have such a receiver, you can get the same result by using a Sound Pressure Level (SPL) meter. These can be bought at Radio Shack for about $20, and they're worth it. You hold it upright while playing the test tones, and manually adjust each speaker until each one is outputting a uniform 65 dB (decibels). It's pretty easy; I've done it a few times now as the speakers have broken in.

- Joe -
Print the post  


When Life Gives You Lemons
We all have had hardships and made poor decisions. The important thing is how we respond and grow. Read the story of a Fool who started from nothing, and looks to gain everything.
Contact Us
Contact Customer Service and other Fool departments here.
Work for Fools?
Winner of the Washingtonian great places to work, and Glassdoor #1 Company to Work For 2015! Have access to all of TMF's online and email products for FREE, and be paid for your contributions to TMF! Click the link and start your Fool career.